GOODRICH L-10-K with buffer amp is similar to the H-10-K model, only in the Low Profile version the same size as the L-120
The L-10-K is a low profile version of the Goodrich Model H-10-K Volume Pedal. It looks like the rest, but looks can be deceiving. Several features put it into a class by itself.
This pedal uses active impedance-matching "no-loss" circuitry. Electronic and other extraneous circuit noises are present throughout your equipment. The circuitry in this pedal removes the "hiss" and "muddiness" from your guitar's sound. What? You don't have a noise problem? No, not until you use this pedal and hear the difference. You will then discover the "mud" in your sound that was there all along. You had grown accustomed to it. Your friends have told you about their Goodrich "no-loss" pedals, but you thought it was hype. It wasn't! You just didn't realize that you need circuit-matching between your guitar and your amp. Just try one; that's all you'll need to do.
Like all Goodrich pedals, two outputs are provided. If you desire, you can send one signal through your effects loop and/or go directly into a recording board. All this added amplification can allow you to drive two amps with no loss in the signal to both. If you need to use a longer output cable, you will not experience any noticeable loss of volume.
A 9-volt battery powers this pedal, and it lasts 1,000 hours. If you want to really increase battery life, simply pull out the line-out cord when you finish playing. The pedal's dimensions are identical to the Model L-120.
One final feature to add to this list is an improved volume taper.
These units carry a one year manufacturer's warranty on all parts including the pot.
The Goodrich Attachment Bracket ($55.00) works well with this pedal.